by parsoncc | Sep 26, 2018 | Tinkercad Design Project
At first the plan was to make a simple standing piano, but then realized that that design was way too simple. Since I still liked the idea of designing a piano, I decided that the best option would be to make a grand piano since they are more detailed and have a more...
by middl2cj | Sep 25, 2018 | Tinkercad Design Project
First Blog Post (Design Project): Hey! Our names are Cam and Cam, and to start we wanted to make a chess board with actual pieces that you could move. However, after some thought we decided that we should go the route of a fire truck/car. We want the truck/cars...
by buschmh | Sep 19, 2018 | Uncategorized
Over the past week, we have updated our design to include a “slide-close” door as opposed to a swing shut door. Additionally, we have changed the dimensions and made them larger so that they better fit over top of out-of-wall outlets. We also added a fun...
by buschmh | Sep 19, 2018 | Uncategorized
From this first test print, we learned that our planned dimensions were a tad small. Additionally, we learned that our door flip design is not very practical, as it swings, comes loose, and falls off fairly easily. The overall idea and design has potential with...
by herlickb | Sep 19, 2018 | Tinkercad Design Project
FIRST DRAFT PRINT The first print of our chess piece turned out pretty well, the holes/squares in the chess piece came out well except in the back where it was being printed/supported. Since we wanted to ensure that the holes came out well, we rotated the chess piece...
by Somer Medawar | Sep 19, 2018 | Uncategorized
Our original design for the planter needed a base that would configure in the same shape as the mountain range shape. The first print was small, which we expected based on how big it was on the plane in Tinkercad, but there is plenty of room for improvement! The walls...
by NicoleP | Sep 19, 2018 | Tinkercad Design Project
Our Blueridge Succulent Planter started out capable of holding plants of the appropriate size, however this can be done by a multitude of readily available containers. Our project should accomplish more; we therefor created a way to make the planter self-watering. To...
by parsoncc | Sep 19, 2018 | Tinkercad Design Project
The old design was really plain and didn’t have much detail so I completely started over on the design. However, I still really liked the idea of doing a piano so I changed it to a grand piano. This time, instead of just planning on painting the keys, I used a...
by Lawrence | Sep 18, 2018 | Tinkercad Design Project
The Image to the left is the computer with the internal components separated outside the computer. We will have to print them out separately and attach them when everything is printed. The image on the right side is the computer with all the internal parts put inside...
by Lawrence | Sep 18, 2018 | Tinkercad Design Project
Our first test print was one of the fans for the inside of the computer. We printed it in two separate parts so it could be made that the fan blades spin. We printed a square with a bar and a fan blade with a small hole inside so the fan blade would be able to sit on...
Recent Comments