by freemael | Oct 23, 2018 | Tinkercad Design Project
We chose to do a water bottle for our tinkered design project! It’s a very basic water bottle with a screw top lid. We just used a cylinder for the main structure and used a hole screw instead of solid screw. Then for the lid we used a solid screw on a smaller...
by freemael | Oct 23, 2018 | Uncategorized
Yaseem and I chose David’s broken coaster to fix. We decided the best way to do that was to make a case that it can sit it. So we measured it to where it sit in it perfectly. We wanted to jazz it up a little so we added some words on it to remind David not to break it...
by freemael | Oct 16, 2018 | Uncategorized
I did a size 8 ring for my original, basic, fusion 360- created ring. I printed it on the Ultimaker and it turned out as expected. When I put it into Meshmixer, I created my own stencil of a celtic knot and it wouldn’t work when I tried to stamp it so I just...
by freemael | Oct 2, 2018 | Tinkercad Design Project
Our final Water Bottle printed quite nicely, after figuring out that we needed to print each piece sideways for it to turn out best. The final modification that we made was changing the lid so that it was more durable for screwing in. Instead of using a scribble hook...
by freemael | Sep 18, 2018 | Tinkercad Design Project
After deciding that we needed to try printing it sideways before changing the design, we tested it out. It turned out much better than what we expected (for the lid at least). We printed it at 70% instead of 100% and the support didn’t mess up the handle on the...
Recent Comments