My partner, Grant, and I decided to challenge ourselves with the “Catch The Wind” challenge. We decided to go with a Frisbee, similar to the one in the following picture: Using Tinkercad, we started with a tube. We then cut… Continue Reading
Fusion 360 Final Project- Flexi Kangaroo I decided to create a flexi animal for my final project. I have wanted to make one in the past, and with all the abilities of this program, I think that it is the… Continue Reading
Rose Themed Rose Gold Ring For my final project I decided to design a piece piece of jewelry. I learned so much more about using Fusion; in particular, my efficiency was boosted by learning the programs shortcuts and hotkeys. Likewise,… Continue Reading
For this project I wanted to create a vase of some sort. I didn’t want it to be basic so I searched for tutorials so I could learn how to properly use a lot of the tools Fusion has to… Continue Reading
I found the fusion 360 program very difficult to work with, but with practice I was able to get the hang of it! Below are my 20 items on the left side column! Fusion Ring: My fusion ring was… Continue Reading
1. Crown 2. Anvil 3. Box 4. Bracelet 5. Alternate Crown 6. Weird Coil 7. Weird Coil 2: Electric Boogaloo 8. Grail 9. Ring w/ Handle 10. IDK 11. M 12. Rose 13. Eye of Sauron 14. Spring 15.… Continue Reading
Ring Project The first ring that I designed is a crown-like band. It was definitely a learning curve to use Fusion 360 but I really enjoy the more hands-on tools it offers. While Tinkercad is simple and a great resource… Continue Reading
I was originally going to print the ring for my ring finger, but I decided that if I was actually going to wear it that I wanted it on my pinky. Originally I wanted a Pokeball symbole on it, but… Continue Reading
Despite being ugly, because it’s vomit-green colored, the ring printed perfectly and without errors on the first try. It’s a little snug though. My process pictures are as follows: To give the ring a cool texture, I decided I would… Continue Reading
Finalizing the Design Before printing, I needed to finalize the design for my buildable rose. To that end, I worked to create the connectors that would allow the print to work as intended, and this led me to reiterate the… Continue Reading