The Idea
For my final Fusion 360 Project, I will be creating a spork. However, it isn’t the traditional spork. Instead, it will have a spoon shape on one side and a fork shape on the other. I want it to look similar to this image:
Process
I decided to start by creating the spoon side of the design first. I did so by creating a sphere and then cutting it in half. I then used the modify tool to create the spoon shape. I used the sketch tool to create the handle part of the design and then modified the shape. I became really familiar with the modify tool and used it the most throughout this project. Once the shape of the design was completed, I needed to make the shape of the fork. I used the sketch tool once again to create a triangle shape where the spears would be. I made a pattern out of that in order to have it be complete. Finally, I finished it off by adding fillets to the sides of the spork.
Some troubles I had were selecting the right piece that I wanted to modify. Sometimes I would click on what I thought was the right edge, however it would completely change the design. The sketch tool was sometimes frustrating as well, because I had a hard time creating the shape I wanted.
The Final Design
Overall I am fairly pleased with the final product. If I were to change anything, it would most likely be the shape of the fork side. Other than that, I feel like this was a successful project.
